CADFathers Polishing Service

Let me make you
an offer
you can't refuse!

I am out of work as some of you know so I'm falling back on something that I have some knowledge of; Polishing.  I can do most any material, brass, aluminum, copper, stainless steel, what ever you may that needs polishing, I'm your man.  And yes polished aluminum does require more attention than chrome, but

WHILE CHROME MAY SHINE IT JUST LACKS SOUL. 

While I'm on the subject let me state this and I cannot emphasize it enough, NEVER under any circumstances place a clear coat finish over polished aluminum.  It will oxidize over time and with clear coat over it you cannot get to it to clean it.  It's kin to painting clear over freshly sanded steel, it'll hold up for a short while but it will eventually rust.  My bike sat outside exposed to the elements after my crash in Sept. of 2006 for at least 3 months, and I haven't done anything to the polished surfaces in the last 2-1/2 years, they still look good, not show worthy but better than most would expect.  I've got a list of most of the parts for the Warrior that I have done with the noted exception of wheels and I tell ya, I'd really have to like you to do your wheels even if you're paying me.  I'm adding the wheels due to the volume of requests that I've had for them but I'll put it this way, you can get them chromed for what I can polish them for, now if your still interested shoot me a Private Message and we will talk.

I have a few parts that I can do on an exchange basis, ie I'll polish the part, send it to you, you then install it and send me your original part(s) back.  That is assuming your original is not beat up or damaged.  I'll compile a list of what I have on hand and add the word (exchange) beside the price, I am constantly adding to this list so if you don't see it just ask.  I don't have a core charge to protect myself on this, but all that I ask is for you to have been a member here for at least a year, or to have at least 50 posts.  If you don't meet either of those just PM me we'll work something out.

Be sure to let your non-Warrior friends know as well, they and you can check me out on the web at:  http://weislake.com/cps/

In addition to the pics here you can review my pics on my photobucket account at:

CAD'S Photobucket Polishing Page and see some of the full sized photos of parts.
 


 


 



 



 


 


 



 


 



 



 


 


 


 


 

Of course if you have any custom parts that need to be done, just let me know.  I'll take a look at them and give you a price, here are a couple of examples of custom parts that I've done.


 

And if you have any questions about my part descriptions just ask or just refer to the parts fiche at MotorSportsSuperStore.com and shoot me their part number.
 

I am more than happy to quote polishing on other parts, bikes, anything you may need polished, just shoot me an email: cadfather@charter.net

All Prices are Plus Shipping Both Ways
 

Below are some examples of my bike
before the crash for reference. 

 

 

And after sitting outside untouched for 3 months


 

Take me back to: Weiss Lake